Call 866-594-2936

Furnace maintenance · Utah County

Furnace Tune-Up in Utah County

Want your furnace checked before the coldest weeks of winter? Get connected with a local heating company for a furnace tune-up and safety check.

  • Gas furnaces & dual-fuel systems
  • Safety, venting & airflow checks
  • Free referral

Call now and we'll connect you with an independent local heating & cooling pro.

Call now: 866-594-2936

This site is a free referral service; work is performed by participating independent companies.

No heat? Check these first

  1. Thermostat set to Heat, a few degrees above room temp, fresh batteries.
  2. Furnace switch on and breaker not tripped; replace a clogged filter.
  3. Smell gas? Leave the house and call your gas utility or 911 from outside.

Quick answers

How often should a furnace get a tune-up?

Answer: Many furnace manufacturers recommend professional maintenance once a year, usually in the fall, and some warranties require regular service. Check your furnace manual and warranty papers for what yours asks for.

What does a furnace tune-up include?

Answer: A good visit checks the burners and flame, cleans the flame sensor, inspects the ignitor, heat exchanger, venting and condensate drain, tests the safety controls, checks the blower and electrical connections, and confirms the furnace is set up correctly for your altitude.

What can I do myself between visits?

Answer: Check the filter monthly during heating season and replace it when it looks dirty, keep the area around the furnace clear, keep supply and return vents open, clear snow away from outside vent pipes, and test your carbon monoxide alarms.

Before you hire anyone

Check the license yourself

HVAC work in Utah is done by state-licensed contractors. Before you sign anything, look the company up on the Utah DOPL license lookup and ask for proof of insurance.

Ask the right questions

Ask each company what the visit includes, what work they recommend and why, and the warranty on parts and work. For a replacement, ask for the model numbers and efficiency rating (AFUE for furnaces, SEER2 for AC).

Who runs this site

Utah Valley HVAC is an independent, free referral service that connects homeowners with local companies. It is not an HVAC contractor. Your request is shared with up to 3 companies. We don't sell your info for other marketing.

Why a fall tune-up matters in Utah Valley

Most of Utah Valley sits well above 4,000 feet; Provo is about 4,550 feet. Gas furnaces installed above 2,000 feet have to be set up for altitude following the manufacturer's instructions and the National Fuel Gas Code. A tune-up is a good time to confirm the burners and gas pressure are adjusted correctly for your elevation.

Winter also brings inversions, when many families keep windows shut and run the furnace for long stretches. Filters load up faster when the system runs more, so check yours more often from December through February. High-efficiency furnaces vent through white PVC pipes on a side wall or roof. Drifting snow can block those pipes and make the furnace shut itself off, so keep them clear after storms.

What a thorough furnace tune-up should cover

  • Thermostat: correct system type, heat settings, and fan set to Auto.
  • Filter: checked and replaced, with the right size noted for you.
  • Burners and flame: cleaned and checked for an even, steady flame.
  • Flame sensor and ignitor: the sensor cleaned and the ignitor inspected for cracks. These are common causes of a furnace that lights and then shuts off.
  • Heat exchanger: inspected for cracks or rust that could let combustion gases into the home.
  • Venting and draft: vent pipes, inducer motor and pressure switch checked; outside terminations clear.
  • Condensate drain: on high-efficiency furnaces, the drain line and trap cleared so they don't back up or freeze.
  • Gas pressure and altitude setup: checked against the manufacturer's specs for your elevation.
  • Combustion and carbon monoxide test: many technicians test the exhaust and the air near the furnace.
  • Blower and electrical: blower wheel, motor, capacitor and wiring connections checked; safety limit switches tested.

Simple checks you can do yourself

  1. Filter. Look at it monthly in winter. Replace it if you can't see light through it.
  2. Space around the furnace. Keep storage, paint and cleaning products away from the furnace and water heater.
  3. Vents and returns. Keep registers open and furniture off the return grilles so air can flow.
  4. Outside pipes. After a storm, clear snow and ice from the intake and exhaust pipes.
  5. Alarms. Test carbon monoxide and smoke alarms and replace batteries as the maker recommends.
  6. Listen and look. Note new noises, smells, or the furnace turning on and off quickly, and mention them at the visit.

Questions to ask before you book

Ask each company what its tune-up includes in writing, whether a combustion or carbon monoxide test is part of the visit, and whether you get a written list of what the technician found. If a company offers a maintenance plan, ask what it covers and how it renews. You can look up any contractor on the Utah DOPL license lookup before the visit.

Areas we serve in Utah County

ProvoOremLehiAmerican ForkSpanish ForkPleasant GroveSpringvilleSaratoga SpringsEagle MountainPaysonHighlandAlpineCedar HillsLindonVineyardMapletonSalemSantaquinElk RidgeGoshen

Frequently asked questions

Is a tune-up the same as a safety inspection?

They overlap. A tune-up focuses on cleaning and adjusting the furnace so it runs well, and a careful one includes safety checks of the heat exchanger, venting and controls. Ask the company exactly which safety checks are included.

My furnace is only a few years old. Does it still need a tune-up?

Newer furnaces still collect dust, and the condensate drain and flame sensor still need attention. Some manufacturers require regular maintenance to keep the warranty valid, so check your warranty terms.

When should I schedule a furnace tune-up in Utah County?

Many homeowners schedule in early fall, before steady cold weather. If you missed fall, a winter visit is still worthwhile, especially if the furnace is acting up.

What if the technician finds a problem?

Ask them to show you the problem, explain what it means for safety, and give you the repair options in writing. For a large repair or a recommended replacement, it's reasonable to get a second opinion.

Is this service free?

Yes. Connecting with HVAC companies through Utah Valley HVAC is free for homeowners. Participating companies may pay us for referrals.

Want your furnace checked before winter?

Call now and we'll connect you with an independent local heating & cooling pro to talk through the problem and next steps.

Call now: 866-594-2936

This site is a free referral service; work is performed by participating independent companies.

Prefer not to call? Request a callback

Leave your details and a participating independent local company can call you back. If you'd rather talk now, call 866-594-2936.

Tell us what's going on. We pass it to local heating and cooling companies.

What do you need?

No obligation, just tell them what happened.

Shared with up to 3 companies. Privacy

Call now: 866-594-2936